Auto Peripheral Electric Automatic Pump
Max.flow:6m³/h
Max.head:60m
Features
Power off without water
Not start frequently when tap water very small or leakage on the Pipeline Extend the service life of the pump
Jams and blocks protector
Built-in thermal protector
Application limits
Suction head up to 8m
Max.liquid temperature 60℃
Max.ambient temperature 40℃
Max.running pressure 4.5bar
Voltage fluctuations should not±10%of rate value
PH 6.5to 8.5
|
Components |
Material |
|
Pump body: |
Cast iron,with brass/AIS1304 SS insert if request,reduces the risk of impeller seizure |
|
Pump support |
Cast iron |
|
Motor housing |
Aluminum |
|
Impeller |
Brass |
|
Motor shaft |
AIS1420 SS,AIS1304 SS if request |
|
Mechanical seal: |
Ceramic/Graphite |
|
Bearings: |
6201 RZ/6201RZ(0.5HP),6202 RZ/6202 RZ(0.75HP&1HP),6203 RZ/6203 RZ(1.5HP&2HP) |
PERFORMANCE DATA
|
MODEL |
POWER |
Max.Flow (m3/h) |
Max.Head (m) |
Max.suction (m) |
Packing dimension (mm) |
G.W (kg) |
Inlet/outlet (inch) |
|
|
Single-phase 220-240V |
KW |
HP |
||||||
|
AWZB200 |
0.2 |
0.27 |
1.8 |
25 |
8 |
300x210x278 |
9.2 |
1"x1" |
|
AWZB300 |
0.3 |
0.4 |
2.0 |
30 |
8 |
300x210x278 |
9.3 |
1"x1* |
|
AWZB400 |
0.4 |
0.53 |
2.2 |
35 |
8 |
300x210x278 |
9.7 |
1"×1* |
|
AWZB600 |
0.6 |
0.8 |
2.7 |
45 |
8 |
300x250x292 |
12 |
1"×1" |
|
AWZB800 |
0.8 |
1.1 |
3.0 |
50 |
8 |
300×250×292 |
13 |
1"x1" |
|
AWZB1100 |
1.1 |
1.5 |
5.0 |
54 |
8 |
365×270×365 |
19.5 |
1.5"×1.5" |
|
AWZB1500 |
1.5 |
2.0 |
6.0 |
60 |
8 |
365×270×365 |
21 |
1.5"×1.5° |
How to Choose the Right Size Auto Peripheral Electric Automatic Pump for Your Needs
When choosing a auto peripheral electric automatic pump, it is important to carefully consider the correct size that meets your specific needs. Acting as a centrifugal pump, a peripheral pump is ideal for low-flow, high-pressure applications such as irrigation, water supply, and boosting.
To make an informed decision about the right size of a auto peripheral electric automatic pump, you need to consider the flow rate and pressure requirements of your system. The flow rate, measured in gallons per minute (GPM) or liters per minute (LPM), indicates the amount of water the pump can transport in a given time. Pressure, measured in pounds per square inch (PSI) or bars, shows the force the pump generates to move water through the pipes.
To determine the necessary flow rate and pressure requirements, you should consider factors like the area to be irrigated or supplied with water, the vertical and horizontal distance between the water source and the destination, and any obstacles that could affect flow, such as elevation changes or bends in the pipes.
Once you know your flow rate and pressure requirements, you can choose a peripheral pump that meets those needs. It is essential to select a pump that falls within the appropriate range of flow rate and pressure for your system. Choosing a pump with inadequate flow rate or pressure may result in insufficient water supply, while a pump with excessively high flow rate or pressure can waste energy and potentially damage the system.
Hot Tags: auto peripheral electric automatic pump, China auto peripheral electric automatic pump manufacturers, suppliers, factory, sewage cutting submersible pump, deep well submersible pump, auto peripheral electric automatic pump, high pressure water booster pump, peripheral clean water pump, peripheral water pump qb60
You Might Also Like
Send Inquiry