China Surface Pump Manufacturers Suppliers Factory - Discount Surface Pump for Sale - Sunlight Electric Machinery & Pump Industry

Company profile

Taizhou Sunlight Electric Machinery & Pump Industry CO., Ltd is a high-quality supplier with 30 years of experience in producing water pumps. The company specializes in the research and development and production of vortex pumps, centrifugal pumps, jet pumps, submersible pumps, deep well submersible pumps, booster pumps, air compressors and other products. Our company has passed the ISO9001-2015 management system certification, and strictly carries out work in accordance with the ISO9001 quality control system standards. It has obtained CE certification and CCC certification. Our products are exported to South America, Eastern Europe, Asia and other countries, and we provide customized services.

Good Working Environment

Construction area 50,000 square meters ，300 employees.

Teamwork And Communication

We would like to offer the best quality,competitive price.

High Quality Products

Produts have won the CE certification,CCC authentication.

After-Sale Service

Best after-sale service to all of customers.

Portable Centrifugal Pump
Centrifugal pumps are used to transport fluids by the conversion of rotational kinetic energy to the hydrodynamic energy of the fluid flow. The rotational energy typically comes from an engine or
Domestic Hot Water Booster Pump
A booster pump is a machine which increases the pressure of a fluid. It may be used with liquids or gases, and the construction details vary depending on the fluid. A gas booster is similar to a gas
Centrifugal Trash Pump-factory
Centrifugal trash pumps are the most common type of trash pumps used in many applications. They work by converting rotational energy from an impeller into kinetic energy, which is used to move the
Standard Centrifugal Pump
The standard (non-self-priming) centrifugal pump is the most commonly used type of centrifugal pump. A standard centrifugal pump has a higher yield than a self-priming pump. When this pump is
Jet Pump For Deep Wells
Deep-well jet pumps are also above the ground, but they draw water by using two pipes. One of these pipes draws water out of the well, while the other pushes the water up. A deep well jet pump sucks
Self-priming Jet Pumps
·Jet pump. ·Self-priming. ·Liquid pumped up to 60℃. ·Clean water with little impurities, non-corrosive liquid.
Standard Centrifugal Pump
·Centrifugal pump. ·Liquid pumped up to 60℃. ·Clean water with little impurities, non-corrosive liquid relative high flow rate, pump water from lake, river and well. ·Medium and low head can meet the
Centrifugal Trash Pump
·Centrifugal pump. ·Liquid pumped up to 60℃. ·Clean water with little impurities, non-corrosive liquid relative high flow rate, pump water from lake,river and well. ·Medium and low head can meet the
Stainless Centrifugal Pump
·Centrifugal pump. ·Liquid pumped up to 60℃. ·Clean water with little impurities, non-corrosive liquid.
1 2 Hp Centrifugal Pump
.Centrifugal pump. ·Liquid pumped up to 60℃. ·Clean water with little impurities, non-corrosive liquid relative high flow rate, pump water from lake, river and well. ·Medium and low head can meet the
Electric Centrifugal Water Pump
·Centrifugal pump. ·Liquid pumped up to 60℃. ·Clean water with little impurities, non-corrosive liquid.
110v Centrifugal Pump
·Centrifugal pump. ·Liquid pumped up to 60℃. ·Clean water with little impurities, non-corrosive liquid.

First 12 Last

What Is Surface Pump?

A surface pump is a type of pump that is used to move liquids from one location to another on the surface level. It is typically used in applications where there is a need to transfer water or other fluids from a source such as a well, lake, or river to a destination such as a storage tank, irrigation system, or industrial process. Surface pumps can be powered by electricity, gasoline, diesel, or solar energy, depending on the specific requirements of the operation.

Advantages Of Surface Pump

Easy Installation

Surface pumps are relatively easy to install compared to submersible pumps, as they are placed above the water source and do not require any special equipment or extensive digging.

Cost-Effective

Surface pumps are generally more affordable compared to submersible pumps, making them a cost-effective option for applications where a high flow rate is not required.

Versatility

Surface pumps can be used in various applications and can handle a wide range of fluids including water, chemicals, and oil.

Accessibility

Since surface pumps are located above ground, they are easily accessible for maintenance and repairs, which helps reduce downtime and operational costs.

Energy Efficient

Surface pumps can be equipped with energy-efficient motors, allowing for optimized energy consumption and reduced operating costs.

Flexibility

Surface pumps can be easily moved and repositioned if needed, providing flexibility for different applications or site requirements.

Durability

Surface pumps are typically designed to withstand harsh environmental conditions and heavy-duty use, ensuring long-term durability and reliability.

Safety

Surface pumps pose fewer safety risks compared to submersible pumps, as there is no need for workers to enter the water source for installation or maintenance.

Types Of Surface Pump

Single-Stage End-Suction Pump

This type of pump has a single impeller situated at the end of the pump shaft. The fluid enters the pump through an inlet pipe and is accelerated by the rotating impeller. The kinetic energy of the fluid is then converted into pressure energy as it exits the pump through a discharge pipe.

Multi-Stage Pump

A multi-stage pump consists of two or more impellers mounted on the same shaft. Each impeller increases the pressure of the fluid before passing it to the next impeller. This design allows for higher pressure capabilities compared to single-stage pumps.

Self-Priming Pump

Self-priming pumps are designed to create suction and lift fluids from a lower level. These pumps have a built-in reservoir that retains enough liquid to prime the pump. When the pump starts, the fluid in the reservoir is drawn into the impeller, creating a vacuum and allowing the pump to self-prime.

Peripheral Pump

Also known as regenerative or turbine pumps, are surface pumps that operate on the principle of centrifugal force. They have a unique impeller design with numerous small radial blades, which creates a regenerative effect.

Jet Pump

Type of surface pump that uses the Venturi effect to create suction and draw water or other fluids from a well or other water source. It is commonly used for domestic water supply, irrigation systems, and other applications where moderate pressure and flow rates are required.

Vertical Turbine Pump

Vertical turbine pumps have a long vertical shaft and multiple stages of impellers. The impellers are stacked in a series, each increasing the pressure of the fluid before passing it to the next impeller. These pumps are commonly used for deep well pumping and can handle high flow rates and pressures.

Application Of Surface Pump

Domestic Water Supply

Surface pumps are commonly used in households to pump water from a well, underground storage tank, or municipal water supply into the house. They can provide consistent water pressure for showers, sinks, toilets, and other domestic water needs.

Irrigation Systems

Surface pumps are extensively used in agricultural irrigation systems to deliver water to crops or fields. They can provide sufficient pressure and flow rates to effectively distribute water over large areas.

Pressure Boosting

Surface pumps are often used to increase water pressure in buildings or commercial establishments where the incoming water pressure is insufficient. They can boost the water pressure to meet the demands of showers, faucets, sprinkler systems, and other water-consuming devices.

Fountain and Pond Circulation

Surface pumps are commonly used in fountains, ponds, and other water features to circulate and aerate the water. They help maintain water quality, prevent stagnation, and create visually pleasing water displays.

Pool and Spa Circulation

Surface pumps are used in swimming pools and spas to circulate water, ensuring proper filtration, chemical distribution, and temperature control. They help keep the water clean, clear, and safe for swimmers.

Firefighting Systems

Surface pumps are employed in firefighting systems to deliver high-pressure water for extinguishing fires. They are typically used in combination with fire hydrants, sprinkler systems, or firefighting equipment to provide adequate water flow and pressure.

Industrial Applications

Surface pumps are used in various industrial processes, such as cooling systems, boiler feedwater systems, wastewater treatment plants, and chemical processing plants.

Construction Sites

Surface pumps are used in construction sites for dewatering purposes. They remove excess water from excavations, foundations, and other areas to ensure a safe and dry working environment.

Oil and Gas Industry

Surface pumps are utilized in the oil and gas industry for various applications, including crude oil transfer, pipeline boosting, refinery processes, and offshore drilling operations.

Our exhibition collection

FAQ

Q: How does a surface pump work?

A: Surface pumps create a vacuum that draws water into the pump through an intake pipe. The water is then pressurized and discharged through an outlet pipe. This is typically achieved using an impeller or piston mechanism driven by an electric motor or gasoline engine.

Q: What are the different types of surface pumps?

A: The main types include centrifugal pumps, jet pumps, self-priming pumps, and booster pumps. Each type has specific advantages depending on the application and water source.

Q: What is the difference between a surface pump and a submersible pump?

A: Surface pumps are installed above the water level, while submersible pumps are placed underwater. Surface pumps are easier to access for maintenance, but submersible pumps can be more efficient for deep water sources.

Q: How do you maintain a surface pump?

A: Regular maintenance includes checking and changing the oil (if applicable), inspecting seals and gaskets, cleaning filters, and ensuring that the electrical connections are secure.

Q: Can surface pumps be used for both clean and dirty water?

A: Some surface pumps are designed specifically for clean water, while others can handle dirty or muddy water. It's important to choose the right pump for the type of water being pumped to avoid damage and ensure efficient operation.

Q: What are the common applications of surface pumps?

A: Surface pumps are commonly used for irrigation, drinking water supply, firefighting, industrial processes, and water transfer in agricultural, residential, and commercial settings.

Q: How do you prime a surface pump?

A: Priming involves filling the pump and suction line with water to remove air. This can be done manually by pouring water into the pump housing or using a built-in priming mechanism if available.

As one of the leading surface pump manufacturers and suppliers in China, we warmly welcome you to wholesale discount surface pump for sale here from our factory. All our products are with high quality and low price.

Send Inquiry