Common booster pump types and how to choose

1. Gas-liquid booster pump
The gas-liquid booster pump is a pump product that uses compressed air as a power source to continuously output liquid at a fixed boost ratio and is used to drive the hydraulic actuator. The pneumatic liquid booster pump has a high output pressure and can boost the liquid to a pressure of 640Mpa.

 

2. Air booster pump
The air booster pump is a power device used to boost gases such as oxygen, nitrogen, and hydrogen. It is also called a gas booster valve. It uses a low-pressure gas at a large-area piston end to drive a high-pressure fluid at a small-area piston end. It can be used to compress air and other gases, and the output air pressure can be adjusted steplessly by the driving air pressure. It is used in working environments where the original air compressor system needs to increase the pressure.

 

3. Liquid booster pump
It has a wide range of uses. The working medium can be hydraulic oil, water, and most chemically corrosive (corresponding corrosion-resistant material seals) liquids, and it has high reliability, maintenance-free, and long life.

 

4. Chlorine booster pump
Chlorine booster pump is used for the circulation reaction of chlorine gas, filling of chlorine gas, and recovery of chlorine gas. The working pressure range is large, the maximum pressure is 90Mpa of gas, the maximum energy saving is 70%, and the extremely low pressure gas can be increased to a very high pressure.

 

How to choose a household booster pump
1. Look at the efficiency of the unit
The most important thing to measure the performance of a household booster pump is not the power, but whether the efficiency of the entire unit meets the demand. When the head and flow are the same, the pump with small power will have better performance.

 

2. Ask the merchant for performance index
The methods for marking the head and flow of booster pumps on the market include maximum and rated. In order to attract more customers' attention, merchants usually exaggerate the marking of parameters such as effective suction, flow, and head. For example, in order to ensure better sales, some manufacturers use the highest head flow for pump marking, which leads to many very outrageous marks. Therefore, before buying a water pump, you should learn more about the actual parameters of the water pump from the seller to avoid unnecessary problems.

 

3. Choose according to your own needs
A booster pump has a characteristic that if the tap water flow cannot meet or exceeds the needs of the water pump, the boosting effect is not obvious enough. Therefore, when purchasing a home booster pump, you must first find out the cause of the problem with your own water pressure, and then prescribe the right medicine. Don't consume too blindly. When purchasing, you can also consult professional plumbing workers or experienced merchants about relevant issues. If you adopt the merchant's suggestions, you can ensure that you have good after-sales service when the water pump effect is not ideal.